These energy saving timers use n
This easy to program timer provides up to 40 ON/OFF
operations per week which can be used for 24-hour or 7-day load control. The
astronomic feature provides sunset ON and sunrise OFF settings and the auto
daylight savings adjustment means you can "set-it and forget-it". The
independent 7-day programming provides complete flexibility for applications
where load switching differs each day of the week. Astronomic programming can be
combined with independent programs to provide a sunset ON and timed OFF program.
A factory supplied CR2 lithium battery provides up to three years of time
keeping without AC power and user program selections are stored in non-volatile
memory. A low battery indicator appears in the display when the battery requires
replacement. In addition, the display continuously shows time of day, day of the
week, timer load and the load status. The timer has an isolated single pole
single throw switch which allows the timer to switch any load type, including
PAR lamps and motor loads from 12 to 277 volts AC or 12 to 28 volts DC, within
the specified ratings. A "3 wire" design allows the timer to replace, or be used
as a single-pole or 3-way (multi-way) switch.
- Model #: EI600C
- Switch: Single-Pole/ 3-Way
- Contact: 12-277 VAC; 12-28 VDC
- Max Wattage:
- Color: Ivory
Single-Pole or 3-Way (Multi-Way) Compatible
Resistive (Heater): 20 Amp, 120-277 VAC
Tungsten (Incandescent) : 15 Amp, 120 VAC; 6 Amp, 208-277 VAC
Ballast (Fluorescent): 16 Amp, 120-277 VAC;
Motor: 1 H.P., 120 VAC; 2 H.P., 240 VAC; 4 Amp, DC Loads: 12 VDC; 2 Amp,
ON/OFF Events per Week
Available in White Ivory and Light Almond
Voltages and Cycles: 50 or 60 Hz.
not use for sunlamps, sauna, etc...