E-Mon D-Mon P3 Pulser- Pulse Output for Interface to EMS/BMS
Model: P3 Pulser
The E-Mon D-Mon P3 Pulser is an optically coupled
interface device that allows E-Mon D-Mon Class 1000 & Class 2000 kWh &
kWh/Demand meters to be connected to an energy management (EMS) or building
automation system (BAS) for data-gathering and/or load control. The pulse width
and value are selected by 2 DIP switches and can be tailored to fit your
specific requirements in the field. A modular plug connects the pulser to the
E-Mon D-Mon meter; a two-screw terminal provides easy connection to the EMS/BAS.
A LED on the pulser shows the rate and duration of the pulse. The pulser has an
operating range of 1.5 to 36 volts AC or DC (supplied by the EMS/BAS.)
Tenant billing, based on both kilowatt hour (kWh) and
kilowatt (kW) demand information from the E-Mon D-Mon meters through the
Real-Time demand reading, allowing the user to see
the effects of loads as they come on or off-line.
Automatic load/shedding/limiting by the EMS to lower
usage and costs.